Loading...

Skip to main content

History: Glossary of Woodworking Joints

View published page Edit published page Collapse Into Edit Sessions

Source of version: 22

«
»

!A
---

!B
---
*__{MOUSEOVER(label="Bridle")}{img type="fileId" fileId="328" desc="Bridle Joint" alt="bridle joint"}{MOUSEOVER}__ - The bridle joint is often defined as the reverse of a mortise and tenon, and is chiefly used in the carpentry and joinery trades. The name probably originated from the fact that it bears some resemblance to the manner in which a bit slips into the horse's mouth and is fastened to the bridle.

!C
---

!D
---
__Dovetail__ {FOOTNOTE()}Drawers, Author DC. “What Is A Dovetail Joint? Types of Dovetail Joinery.” DC Drawers Blog, 12 Dec. 2018, https://www.dcdrawers.com/blog/what-is-a-dovetail-joint-types/.
{FOOTNOTE}See various types of Dovetail joinery below: 
*__Through__ - A Through joint is where the end grain is visible from both boards. Through dovetail joints are most commonly used on box construction and carcass (framework of the piece).  This joint is also called a plain dovetail by many in the woodworking community.  In the past the ends showing through would have been masked by a veneer. Today they are a sign of exceptional quality and are left showing with pride.
*__Half-blind__ - A half-blind dovetail joint also known as the single-lap dovetail joint is exactly opposite of a through joint because the end grain is not visible on the boards. Sockets house the tails at the end of the boards so the dovetail ends are invisible. Half-blind dovetail joints are commonly used for attaching drawer fronts.
*__Secret mitered__ - A secret mitred joint is also know as a full-blind mitred dovetail and full-blind dovetail joint. Secret mitered joints are used in box work and cabinet construction and offers the best strength out of all of the dovetail joints. These joints are used for box work or fine cabinet construction where strength is needed without a joint you can see.
*__Secret double-lapped__ - The secret double-lapped dovetail joint is kind of the like the mitred joint but has a visible section of end grain on a single edge of the joint. similar to the secret mitred dovetail, but presents a very thin section of end grain on one edge of the joint. Secret double-lapped joints are used for box construction and carcass construction to hid the dovetails.
*__Sliding__ - The sliding dovetail joint is created by joining 2 wood boards at 90 degree angles, where the they intersect different than other types of dovetail joints. They intersect by sliding the tail of one board into the middle socket of the other. Sliding dovetail joints are commonly referred to French Dovetail joints. Sliding joints are commonly used to joint cabinet sides to shelves, sides to cabinet bottoms, shelves to horizontal partitions, table frames to adjacent sections, sides to drawer fronts, cabinet sides to front rails, body and neck in guitars and violins.

!E
---

!F
---

!G
---
*__{MOUSEOVER(label="Glued" closeDelay="3")}{img type="fileId" fileId="329" desc="Glue Joint" alt="glue joint"}{MOUSEOVER}__ - The glued joint is made by planing two pieces of timber so that when placed together they are in contact with each other at every point; they are then usually united with glue. Alternative names under which it is known are the butt joint, the rubbed joint, the slipped joint, whilst in certain localities it is known as the slaped (pronounced slayped) joint.
!H
---

!I
---

!J
---

!K
---

!L
---

!M
---
__Mitering__ - The term mitering is generally used to denote the type of joint used at the corner of a picture frame; or where two pieces of wood are bevelled away so as to fit each other, as the skirting or plinth mould. In these cases the timber is cut so that the joint is at 45 degrees to the face, and the two pieces, when placed together, form an angle of 90 degrees (a right angle).

__((Mortise and Tenon|Mortise and Tenon))__ - A mortise (or mortice) and tenon joint is a type of joint that connects two pieces of wood or other material. Woodworkers around the world have used it for thousands of years to join pieces of wood, mainly when the adjoining pieces connect at an angle of 90°. In its basic form, it is both simple and strong.

__((Mortise and Tenon|#Mortise|Mortise))__
*__Corner Stub__ - 
*__Foxtail__ -
*__Haunch__ - 
__((Mortise and Tenon|#Tenon|Tenon))__
*__Feather__ -
*__Pinned__ -

!N
---

!O
---

!P
---

!Q
---

!R
---

!S
---
__Scarf__ - The method known as "scarfing" is used for the joining of timber in the direction of its length, enabling the workman to produce a joint with a smooth or flush appearance on all its faces. One of the simplest forms of scarfed joint is known as the half lap, in which a portion is cut out at the end of each beam or joist, equal in depth to half the full depth of the beam, and of equal length to the required scarf.

!T
---

!U
---

!V
---

!W
---

!X
---

!Y
---

!Z
---

!References
{footnotearea }

History

Enable pagination rows per page

Advanced

Information	Version
07-11-2024 13:07 admin mouseover Plugin modified by editor.	78
07-11-2024 13:06 admin mouseover Plugin modified by editor.	77
07-06-2024 17:53 admin	76
07-06-2024 17:50 admin mouseover Plugin modified by editor.	75
07-06-2024 17:50 admin mouseover Plugin modified by editor.	74
07-06-2024 17:49 admin mouseover Plugin modified by editor.	73
02-11-2023 19:30 admin	72
02-11-2023 19:27 anonymous mouseover Plugin modified by editor.	71
01-06-2023 08:51 admin img Plugin modified by editor.	70
01-06-2023 08:51 admin mouseover Plugin modified by editor.	69
01-06-2023 08:50 admin img Plugin modified by editor.	68
01-06-2023 08:50 admin img Plugin modified by editor.	67
01-06-2023 08:50 admin img Plugin modified by editor.	66
02-15-2022 14:33 admin footnote Plugin modified by editor.	65
05-15-2020 06:17 admin ref	64
05-15-2020 06:17 admin footnote Plugin modified by editor.	63
05-15-2020 06:17 admin footnote Plugin modified by editor.	62
05-15-2020 06:16 admin footnote Plugin modified by editor.	61
05-15-2020 06:14 admin ref	60
05-15-2020 06:14 admin ref	59
05-15-2020 06:13 admin none	58
05-15-2020 06:13 admin none	57
05-15-2020 05:46 John Morris none	56
05-15-2020 05:44 John Morris added ref	55
05-15-2020 05:43 John Morris added lap	54

«
1 (current)
2
3
4
»