The Tree

White Fir, so called because of the ashy hue of its bark, is one of ten native firs in the United States. It is considered the most important. It is a massive, low-branched, heavily-foliaged tree, 100 to 150 feet high with a diameter of 20 to 40 inches. On old, mature trees the ashy-gray bark may be four to six inches thick, deeply furrowed and hard. Fortunately, it is quite fire-resistant. The needles are flat and thick, blunt-pointed, and yellowish-green in color with a bluish cast on the younger trees which later turns to a pale yellow green with a whitish tinge. The needles are borne spirally, pointed upward on the upper branchlets, and are from one to three inches long. The short cones, three to five inches long, are smoothly scaled and stand erect on the higher twigs. They are a pale olive green with an ashen tinge or sometimes a chrome yellow green color. The resin “bleeding” from the tree is said to have medicinal properties.

Common Names in Use

• White Fir (Calif., Oreg., Idaho., Utah., Colo., and trade)
• Balsam (Calif., Colo., Utah)
• Balsam Fir (Calif., Oreg., Idaho., Colo., and trade)
• Balsam-tree (Idaho)
• Bastard Pine (Utah)
• Black Gum (Utah)
• Blue Fir (Colo.)
• California White Fir (Calif)
• Colorado Silver Fir (lit.)
• Colorado White Fir (Colo., Calif., lit.)
• Concolor Silver Fir (Eng., lit.)
• Silver Fir (Calif., Colo.)
• White Balsam (Utah)

Growth Range

The natural growth range of White Fir extends principally along the Pacific Coast and interior mountain ranges in more or less scattered stands from southern Oregon throughout the southwest and as far east as central Colorado and New Mexico. Small stands are also found in Washington, western Montana, Idaho and southward through Arizona and central Mexico.

The Wood

The wood of White Fir is moderately soft and stiff, fine-textured, straight-grained, non-resinous and almost white in color with indistinguishable sapwood. It works easily with tools, is easily glued, and holds nails and screws fairly well.

Uses

The principal use of White Fir is for paper pulp. The lumber is used for general building construction, boxes, crates, planing mill products, sash, doors, frames, sheathing, and because of the absence of odor or taste and freedom from stain, for food containers.

You are free to:

• Share — copy and redistribute the material in any medium or format

• Adapt — remix, transform, and build upon the material

The licensor cannot revoke these freedoms as long as you follow the license terms.

---

Under the following terms:

• Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

• NonCommercial — You may not use the material for commercial purposes.

• ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.

• No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

---

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

Above all

We just want you to enjoy the information here, we hope you find it useful and educational. Please use the content within this woodworking wiki in the spirit of sharing, collaboration and research. An open web benefits all!

---

The Patriot Woodwiki by The Patriot Woodworker Community is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.